5 Key Steps to Replacing an AC Filter
Air conditioning is in many homes – more than 100 million. Proper maintenance of your AC system will make function efficiently and you will not be spending a lot of money on this service. The functionality of an AC system depends on how clean the filters are so you need to know what it takes to replace them. After some time of operation, the filter becomes dirty especially after collecting these contaminants. Although you may not know where to start, it is a simple thing and after your first attempt, it will not take you longer later. The steps in the discussion below should guide you when replacing your AC filter.
The first step is finding where the filter is located. Depending on the structural design of your house, you may find it at the basement Those who live in apartments may find the filters at the utility room. There are two ways through which you can filter the return air. If it is near the AC unit, that is where you will replace it. If it is near the thermostat, you will have to replace it in the return air vent.
When buying this product, ensure that you make the right choice. You can make the right decision if you read the printed information on the filter to learn more about its description. Find a credible online source to learn more about various types of filters and the right one for your AC system. Find a place that also sells the filters so you can be sure to adequate info. regarding the qualities as well as the prices. You can as well extra filters to avoid going to the store frequently. Remember that you can change your filters frequently, sometimes as often as monthly depending on the environment.
Although you may have to use pliers, sometimes you can just open the vent with your fingers. Once you loosen the fastener, the cover/vent should open. You may have to use a ratchet depending on the systems. To avoid headaches and spending a lot of time, ensure that you have the right tools for the job. Check out for indications that the filter should be replaced. When removing the filter, you can either expect it to come towards you or parallel to you depending on the vent.
When sliding the new filter into the place of the old one, remember to pay attention to the arrows because it should face the wall to avoid impeding airflow into your AC unit. Once the filter is well seated, it is time to replace the vent or cover. Should you wish to learn more about various ways of maintaining your AC unit, read more here.